Thank you for visiting the Titleist Scotty Cameron Newport Studio Style section of our store.  This was the first aftermarket Scotty Cameron insert we designed back in 2011.  The stock insert was stainless steel, and we felt the replacement should add a bit of weight and consist of a softer metal.  The high density and softness of copper accomplish both, and one only needs to look at the success of the 2017 & 2018 US Open champion with his copper faced Cameron to judge the success of the concept.

For now, only the CNC copper version is available.  We may be working on some 3D printed SS versions in future.  There are 2 types of Studio Style:  flow neck and plumber's.  This club has been counterfeited, so be careful when purchasing a candidate.  We can even help decipher the real from fake.  Also if your club has "350g" labeled on the sole, please email us for special arrangements.

These insert provide the following advantages:

-Unique head weight and response

-A dense sound during ball contact

-The classic amber copper aesthetics.

-Your own Scotty Cameron Studio Style Milled Copper prototype.  Not many of these will be made.

Material:  copper

Weight:  50 g  (total head weight is then about 330g)

Finish:  milled smooth or flycut grooves, see listings below

Edge:  square edge

Quantity:  1

The Cameron Newport Studio Style may well disassemble by unbolting the buttonhead bolts after applying some heat to the insert side with a torch.  If not, drilling out the bolt heads may be necessary if the next of the allen key strips.  

Before assembling your club with epoxy, please do a pre-fit.  From experience, some inserts drop in perfectly level.  Others required some shimming, which may be accomplished with shim stock or aluminum foil behind the insert to prop it up.  Cameron club insert pockets are usually pretty accurate, but some have allowed the insert to sit too low by 0.008" or so.  The USGA allows an insert to sit proud by 0.006" or shallow by 0.004".  We are always available for help, or we can do the install for you for another $79.

The listings below are for one insert only, and they do not include the clubhead.

These inserts are precision manufactured in the U.S.A.

We've recently seen these may have been reissued with a new insert height where the thickest portion is about 1/4".  We have not seen many, and we have a design to accommodate this.  Please email design@spryevo.com for more details to suit your needs.